Furuno 000-117-603 Data Cable

6 pin data cable

Furuno 000-144-418 7pin Cable

Nmea in 1rs232c/12V out

Furuno 000-144-534 10m Ext

Cable for bbwgps/smartsensors

Furuno 10m Navnet Ethernet Cbl

6p f - 6p f cross over

Furuno 12V Pump For Up to

The PUMPHRP10-12 is a reversing pumpset designed to interface the navpilot 500 autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two-piece gear housed in an eccentric ring. This allows for incredibly quiet, reliable and precise operation. A hydraulic steering system consists of a hydraulic actuator and one or more steering wheel pumps, or helm pumps. As the steering wheel helm pump is turned in the port direction, hydraulic oil is pumped into the port hydraulic steering line. This oil is directed into the port side of the steering cylinder. As the cylinder moves to port, oil from the starboard side of the cylinder returns to the helm pump through the starboard hydraulic lines. One end of the cylinder is fixed and the other is connected to a tiller arm, which is connected to a rudder shaft. with this connection to the tiller arm the linear movement of the cylinder to port is changed to rotary movement, which turns the rudder and steers the vessel to port. Moving the steering wheel to starboard produces the same reaction with oil being pumped out of the starboard line and returning through the port line. If more than one helm pump is used, a return/fill line must be installed to connect the cases of all helm pumps together. The output flow rate of the pumpset determines the speed of the steering cylinder. The PUMPHRP10-12 outputs 1 cu. in. of oil per second and requires a 12vdc input. 13 cui rams

Furuno 1m Navnet Ethernet Cbl

6p f - 6p f cross over

Furuno 20m Navnet Ethernet Cbl

6p f - 6p f cross over

Furuno 235DHT-LMSE Lsbth

Smart sensor depth/temp 200 watts 235 khz bronze thru-hull with 7 inch stem depth and high-precision temperature / -. 02 degree 10-meter cable with 7-pin connector fairing block and installation materials included

Furuno 235DST-MSE LP Bronze Th

w/retractable insert 200 watts 235 khz bronze thru-hull depth, speed and temperature / - 1 degree 10-meter cable with 7-pin connector

Furuno 235DST-PSE LP Nylon Th

w/retractable insert 200 watts 235 khz plastic thru-hull depth, speed and temperature / - 1 degree 10-meter cable with 7-pin connector

Furuno 235DST-PWE Tm Tri

Smart sensor 200 watts 235 khz plastic transom mount depth, speed and temperature / - 1 degree 10-meter cable with 7-pin connector this unit uses the airmar p66 housing which is available in two different styles that utilize different mounting hardware. Please see the document entitled p66 styles under the manuals/documents tab for more information.

Furuno 235DT-MSE Depth/Temp

Bronze th smart sensor 200 watts 235 khz bronze thru-hull depth and temperature / - 1 degree 10-meter cable with 7-pin connector

Furuno 235DT-PSE Nylon Th

200 watts 235 khz plastic thru-hull depth and temperature / - 1 degree 10-meter cable with 7-pin connector

Furuno 30m Navnet Ethernet Cbl

6p f - 6p f cross over

Furuno 520-5MSCA Brz Th Depth

600 watts 50/200 khz 46/10 degree beam angles bronze thru-hull 8-meter cable with 8-pin connector

Furuno 520-5MSD Brz Th Depth

600 watts 50/200 khz 46/10 degree beam angles bronze thru-hull 8-meter cable with 10-pin connector

Furuno 520-5PSD Plastic Thru Hull Transducer 10 Pin

600 watts 50/200 khz 46/10 degree beam angles plastic thru-hull 8-meter cable with 10-pin connector

Furuno 520-IHC in-Hull Ducer

w/8 pin connector 600 watts 50/200 khz 45/15 degree beam angles plastic in-hull mount for shoot-through applications 30 foot cable with 8-pin connector

Furuno 520-IHD in-Hull Ducer

w/10 pin connector 600 watts 50/200 khz 45/15 degree beam angles plastic in-hull mount for shoot-through applications 30 foot cable with 10-pin connector

Furuno 520THPD Brz Th

B256 style 1kw 50/200 khz 25/5 degree beam angles bronze thru-hull with temperature 30 foot cable with 10-pin connector

Furuno 525-IHD in Hull Ducer

1kw 50/200khz m260 transducer with in-hull kit 1,000 watts power 50/200 khz with diplexer 19/6 degree beam angles plastic transducer with in-hull mounting kit 10-pin connector

Furuno 525-Ihn in Hull Ducer

No connector m260 transducer with in-hull kit 1,000 watts power 50/200 khz, no diplexer 19/6 degree beam angles plastic transducer with in-hull mounting kit

Furuno 525ST-MSC Bronze Th Tri

600 watts 50/200 khz 40/10 degree beam angles bronze thru-hull with speed and temperature 30 foot cable with 8-pin connector w/8 pin b744v housing

Furuno 525ST-MSC7 Long Stem

600 watts 50/200 khz 40/10 degree beam angles bronze thru-hull with 7 inch stem, speed and temperature 30 foot cable with 8-pin connector bronze thru hull triducer

Furuno 525ST-MSD Bronze Th Tri

600 watts 50/200 khz 40/10 degree beam angles bronze thru-hull with speed and temperature 30 foot cable with 10-pin connector high-speed fairing block included w/10 pin w/high speed block

Furuno 525ST-MSD7 Long Stem

600 watts 50/200 khz 40/10 degree beam angles bronze thru-hull with 7 foot stem, speed and temperature 30 foot cable with 10-pin connector bronze thru hull triducer

Furuno 525ST-PWC Tm Quad Ducer

600 watts 50/200 khz 45/11 degree beam angles plastic transom mount with temperature and removable speed assembly 30 foot cable with 8-pin connector this unit uses the airmar p66 housing which is available in two different styles that utilize different mounting hardware. Please see the document entitled p66 styles under the manuals/documents tab for more information. 25 foot cable 8pin connector

Furuno 525ST-PWD Tm Quad Ducer

600 watts 50/200 khz 45/11 degree beam angles plastic transom mount with temperature and removable speed assembly 30 foot cable with 10-pin connector this unit uses the airmar p66 housing which is available in two different styles that utilize different mounting hardware. Please see the document entitled p66 styles under the manuals/documents tab for more information. 25 foot cable 10 pin connector

Furuno 525T-BSC Bronze Th

600 watts 50/200 khz 45/15 degree beam angles bronze thru-hull with temperature 30 foot cable with 8-pin connector depth/temp 8 pin b45 housing

Furuno 525T-BSD Bronze Th

600 watts 50/200 khz 45/15 degree beam angles bronze thru-hull with temperature 30 foot cable with 10-pin connector depth/temp 10 pin b45 housing

Furuno 525T-HDD 1kw Depth/Temp

1,000 watts power 50/200 khz with diplexer 20/6 degree beam angles bronze thru-hull with temperature 10-pin connector w/ 10 pin plug /b260 style

Furuno 525T-HDN Bronze Th

1 kw 50/200 khz, no diplexer 20/6 degree beam angles bronze thru-hull with temperature 10 meter cable no connector provided b-260style no conn

Furuno 525T-PPD Trolling Motor

600 watts 50/200 khz 45/11 degree beam angles plastic puck transducer with temp sensor use for trolling motor or portable applications 15 foot cable with 10-pin connector ducer 10pin 50/200khz

Furuno 525t-Pwd Tm Depth/Temp

600 watts 50/200 khz 40/10 degree beam angles plastic transom mount with temperature 30 foot cable with 10-pin connector this unit uses the airmar p66 housing which is available in two different styles that utilize different mounting hardware. Please see the document entitled p66 styles under the manuals/documents tab for more information.

Furuno 526-IHD 50/200khz 1kw

The 526-IHD is an in-hull transducer utilizing broadband technology m260 transducer with in-hull kit 1,000 watts power 50/200 khz with diplexer 19/6 degree beam angles plastic transducer with in-hull mounting kit 10-pin connector in-hull ducer 10 pin

Furuno 526T-HDD 50/200khz 1kw

526T-HDD bronze thru-hull transducer with broadband technology 1,000 watts power 50/200 khz with diplexer 20/6 degree beam angles bronze thru-hull with temperature 10-pin connector ships with high-speed fairing block, air-033-391 brz th depth/temp w/block

Furuno 5m Navnet Ethernet Cbl

6p f - 6p f cross over

Furuno AIR-033-270 Y Cable

Transducer y-cable, 10-pin f to 10-pin m and 6-pin m

Furuno Bbff-3 1kw Black Box

Furuno s new BBFF3 high power, network sounder is your key to finding more fish. This network fish finder connects directly to a navnet display or an ethernet hub with a single ethernet cable. If it is connected to an ethernet hub that has multiple displays attached, each of those displays will have access to the fish finder features. The unit itself can be configured as a 1, 2 or 3 kw rms output, dual frequency sounder. You may choose low frequency, high frequency or both at the touch of a key and obtain detailed echoes of bottom structure and fish using phased range scales up to 2,400 meters. It also utilizes furuno s free synthesizer ffs transceiver which means you can easily select from a broad range of frequencies. The BBFF3 turns any navnet display into one of the most powerful fish finders available on the market today. and because it is being used on a navnet display, you can split the screen with other navnet features like: radar, chart plotter, navdata and even video, depending on which navnet unit you have. Sounder

Furuno BBFF1 Sounder - Module

Furuno s new BBFF1 network sounder can turn any navnet display into a powerful, dual-frequency fish finder. This compact network sounder connects directly to a navnet display or an ethernet hub with a single ethernet cable. If it is connected to an ethernet hub that has multiple displays attached, each of those displays will have access to the network sounder. The sounder itself has a selectable 600w or 1kw output power. You may choose lf 50khz , hf 200khz or both at the touch of a key and obtain detailed echoes of bottom structure and fish using range scales of up to 5,000 ft. and because the network sounder is used on a navnet display, you will also be able to use its radar and chart plotter features depending on which unit you have. For navnet

Furuno Bbwgps Waas Sensor

Furuno s bbwgps waas/gps receiver antenna makes any navnet product capable of receiving waas and gps information. Now there is no need to have a separate unit to get your waas/gps fix. This waas/gps receiver antenna has everything you need built-in, and it delivers accuracy better then 3 meters by decoding gps correction signals from the waas wide area augmentation system. in addition to its waas capability, the antenna has a compact 12-channel gps receiver that provides accurate and reliable position fixing. Simply connect the antenna to any navnet display and you can display waas/gps information on one display or the entire navnet network.

Furuno CA200B-8B 2kw 200khz

2 kw 200 khz 5. 5 degree beam angle 5. 7 lbs. Rubber coated - chest, housing or tank mounted 15-meter cable, no connector provided rubber coated transducer

Furuno CA50/200-12M Brz Th

1 kw 50/200 khz 28/8. 5 degree beam angles bronze thru-hull 10 meter cable, no connector provided mb1000 and air-033-333 required for some applications - contact furuno for more information

Furuno CA50B-12 2kw 50khz

2 kw 50 khz 16x16 degree beam angle 16. 5 lbs. Rubber coated - tank mounted 15-meter cable, no connector provided may be used for 75 khz frequency setting feature, available only in fcv1100/1200 and fcv1200bb rubber coated transducer

Furuno CAT2000TH Temp Th

Bronze thru-hull temperature sensor, 6-pin connector, 8-meter cable

Furuno CU200 Remote Chart Card Reader

The furuno CU200 is a chart card reader that is compatable with a number of furuno models. There are two card slots on the CU200; the left slot is for reading data from the chart card and the right slot is for reading and writing data to and from a ram card. When used with navnetbb units, the CU200 will read furuno or navionics up to xl mini chart cards. When used with navnetbb/nt units, the CU200 will read c-map/nt mini chart cards. If used with far2xx7 series radar, the CU200 will read furuno or navionics up to xl mini chart cards only. For more information please contact furuno usa, inc.

Furuno Display Adapter Cbl

0. 5m 6p e -rj45 m

Furuno FAP5001A Second Station

The FAP5001A is a double-din sized display designed for use in a navpilot 500 or navpilot 511 system where multiple stations are desired. Multi-station capability, maximum of six stations, is available through the utilization of a high speed network. The FAP5001A is supplied with all of the hardware required to connect to the navpilot system. The FAP5001A in the photo is shown with optional mounting bracket. 4. 6 inch LCD display

Furuno FAP5011A Second Station

The FAP5011A is a single-din sized display designed for use in a navpilot 500 or navpilot 511 system where multiple stations are desired. Multi-station capability, maximum of six stations, is available through the utilization of a high speed network. The FAP5011A is supplied with all of the hardware required to connect to the navpilot system. 3. 6 inch LCD display

Furuno FAX-207 Weather Fax

No lengthy passage is not complete without the furuno fax207. This affordable and programmable weather fax receives high quality, high resolution weather updates and satellite images information that is critical to the success of any extended ocean voyage. The fax207 also incorporates a stand-alone ssb receiver. The fax207 operates independently without requiring a separate ssb receiver. A variety of antenna options or an optional coupler may be used to simplify the installation and enhance performance.

Furuno FAX-5 Coupler

Select the best time for passage making, and know which way to turn to avoid fronts and pressure systems with up-to-the-minute weather maps. with its extensive programmability and combined receiver and printer design, the furuno fax-207 is considered one of the best. Like most medium-frequency transmissions, weatherfaxes are affected by time of day and distance between the receiver and transmitter. The fax-207 can scan all available frequencies at the scheduled transmission time and select the band with the clearest signal. Program it to turn on, receive a map and turn off with no operator intervention. Uses 8 foot thermal fax paper receives signals from 80khz to 25mhz has 376 pre-programmed channels, and you can add another 200 preprogram up to 30 separate events requires the FAX-5 amplified antenna coupler and a loran whip antenna must operate independently of other hf radios onboard optional navtex receiver can be added to receive text messages of interest to mariners it can also use an insulated backstay antenna unless already used as a ssb antenna

Furuno FAX30 Navnet Black Box

Furuno s new FAX30 can turn any navnet display or pc into a weatherfax and navtex receiver. This waterproof black box unit connects directly to a navnet display or an ethernet hub with a single ethernet cable. If it is connected to an ethernet hub that has multiple 10. 4 inch navnet displays attached, each of those displays will have access to the FAX30. in addition, the FAX30 has the capability of being connected to a standard pc with ethernet card. The unit itself receives valuable weather images and navigational information. When connected to a 10. 4 inch navnet display, the image and information is displayed directly on screen, with softkey menu options for ease of use. on a pc, the images and information are displayed by simply using your web browser. There is no complicated proprietary software to install or learn. You can even print all of the information using your pc and printer! Combine the new FAX30 with navnet s true color radar and you have the ultimate in weather tracking. Now you can navigate more safely even during uncertain conditions. Weather fax

Furuno FM-3010 Remote Mic

with the optional FM-3010 remote second-station control microphone, you can control all available functions of the fm-3000 vhf radio except dsc operation from a remote location such as a deck or flybridge. The FM-3010 also has a one-touch channel 16/9 key and can double as a handy intercom system, allowing you to talk with the fm-3000 transceiver. For fm3000

Furuno FM3000 Vhf

The fm-3000 radiotelephone is a rugged, reliable 1 watt and 25 watt radio with built-in dsc functionality built to withstand the harshest conditions that may be encountered at sea. Its compact, waterproof case design allows a simplified installation on any steering console, helm or flybridge. Dedicated control buttons and a rapidly operated rotary channel selector offer easy access to all u. S. and international marine vhf channels. Instant channel 16 access, up-to-date marine weather reports on 10 different channels and other advanced features are at your fingertips. with the optional fm-3010 remote second-station control microphone, you can control all available functions of the fm-3000 vhf radio except dsc operation from a remote location such as a deck or flybridge. The fm-3010 also has a one-touch channel 16/9 key and can double as a handy intercom system, allowing you to talk with the fm-3000 transceiver.

Furuno FS-1503 Ssb

Power, versatility and quality performance are standard features of furuno s fs1503 150 watt , p-p single sideband ssb radiotelephone. This rugged, splash-proof 150 watt max radio is ideal for commercial fishing operations, extended cruising or any situation requiring long-range communication capabilities. The fcc type-approved fs1503 incorporates the most advanced technology available and is built to withstand demanding marine conditions. It s also simple to use, thanks to a choice of rotary control or touchkey frequency/channel selection. Instant access to international calling, and distress frequency 2182khz is available at the touch of a single button. Optional remote station rb500the optional rb500 allows operation of the radiotelephone at a remote location. Key functions include intercom, instant selection of 2182khz, squelch on/off, tx hi/low control. The fs1503 has one port for connecting rb500 or db500 distribution box. The db500 allows the connection of up to four remote stations.

Furuno Gp32 Waas Gps Receiver

Compact in size, waterproof, yet big on power, features and performance, furuno s gp32 is perfect for a wide range of smaller fishing boats and pleasure craft. This advanced unit, based on the popular gp31, provides accurate and reliable position fixing, thanks to a super sensitive, 12-channel gps receiver combined with integrated waas technology. The unit has a waterproof display and is built to stand up to tough marine conditions. This durable casing houses an impressive memory, capable of storing up to 1,000 points of ship s track, 999 points for marks and waypoints, and 50 routes of up to 30 waypoints each. Vital navigation data is presented on a 4. 5-inch diagonal silver bright LCD screen with adjustable brilliance. Innovative graphic displays include nav, highway, steering, track plotting, and two operator programmable modes, all extremely easy to use. The gp32, like all furuno nav receivers, feature furuno s nmea 0183 programmable interface system for feeding highly accurate nav data to your furuno radar, chart plotter, autopilot or sounder. It even includes a dedicated rs-232 port for connection to a pc. and of course, it integrates perfectly with furuno s navnet line of radar/chart plotters.

Furuno GP37 Waas/Dgps Gps

The new GP37 dgps/waas navigator is compact in size, yet big on power, features and performance. This waterproof unit is perfect for a wide range of boats. It is equipped with a waas and a dgps receiver as standard supply. It utilizes both waas and differential radio beacon correction methods to give you the most accurate position fix available. The GP37 offers extremely accurate position fixes -- 10m for basic gps, 5m or better with dgps and 3m or better where waas service is available. It should be noted that dgps is more reliable and accurate, as the waas system is still currently under development. There is no guarantee of accuracy, integrity, continuity or availability of the waas signal. For that reason, the GP37 runs with dgps as the default setting in auto selection mode. in this mode, if the dgps signal can not be received for any reason, the waas mode is automatically selected. Manual setting is also available. The display modes include plotter, two customizable displays, steering, highway and speedometer mode.

Furuno GPA-017 Antenna

Gps antenna with 10 meter cable

Furuno Hub Adapter Cab 0.5m

6p m - rj45 m

Furuno LC-90MKII Loran

Furuno s model lc90mk2 is a proven high-performance, commercial-quality loran-c that s at home on any size boat. It features advanced software -- including state-of-the-art asf compensation and magnetic variation and an unmatched gri selection table. It has a proven, high-speed loran-c receiver for high accuracy and quick updates. The loran has been given an extended life by the u. S. Government, and furuno is the only major manufacturer who still produces a full-function loran-c unit.

Furuno LH-3000 30w Loud Hailer

The furuno LH-3000 is a high-performance 30 watt loud hailer with an intercom function. The LH-3000 is designed for a wide variety of ships, requiring high quality onboard and ship-to-ship communications under almost all circumstances. Solidly built and waterproof, the LH-3000 contains a high quality built-in speaker and a microphone. on its front panel, there are easy-to-see states indicators. by generating voice or eight internationally acknowledged warning signals from the horns, the LH-3000 notifies nearby vessels of your presence and status regardless of visibility conditions. The LH-3000 can also function as an intercom, when connected to optional intercom speakers. Up to four intercoms can be connected for two-way communication between the bridge and one or all intercom stations. The LH-3000 can be connected to various equipment to enable useful functions. When connected to an external alarm unit, the LH-3000 can function as a security alarm. An auxiliary audio input allows transmission of music or other external audio signals from cd player, radio, etc. to the intercom speakers and external horns.

Furuno Maxsea Commander Software

A system powerful enough to satisfy the most demanding captain, yet intuitive enough to provide information for the entire crew: that s the concept behind maxsea commander. Whether you use commander for sailing, cruising, sport fishing, commercial fishing, or workboat operations, it represents the ideal intersection of high technology with practical seamanship. Previous generations of maxsea embodied this principle perfectly. Today, maxsea commander draws on the best characteristics of these pioneering technologies and takes the concept to another level. with software add-on modules, you can customize commander to fit your specific needs. Unparalleled raster, vector and 3d chart support - if you already own electronic charts, the odds are that maxsea will read them. From c-map cartridges to maptech cd s to noaa enc s-57 foots, maxsea works with more charts than any other platform and displays them seamlessly. Maxsea is also the only platform that supports mapmedia charts with their patented m2 technology. in addition to providing the worlds most advanced raster charts, mapmedia s 3d bathymetric charts are the most accurate available. Powerful layer technology - with maxsea s layers, the amount of text or other elements you can add to a chart is virtually unlimited. The overwhelming advantage of layers is that they allow you to segregate your marks and only show/hide the information critical to the task at hand. Advanced log book and annotation - information gathering is automatic and intuitive with maxsea. You can generate log book entries based upon any information coming into the system. You can save tracks, load and read wrecks and rookeries data, mark your favorite spots or where you ve set traps quickly and easily. Maxsea grows with you and quickly becomes the repository for priceless information accumulated while underway. Intuitive planning - one of the things that makes maxsea s interface so advanced is its simplicity. Routes can be created or changed in seconds. Maxsea can drive autopilots, upload routes to your plotter, and save them for future reference. Precise weather - not only does maxsea provide free access to the most comprehensive weather data available, it gives you the ability to really use it. with one button click, wind, waves, sea surface temperature, ocean currents, pressure and 500 mb data can be overlaid onto your navigation chart for display while planning or while underway. Integrated tides and currents - with a single button click, detailed tide and current indicators are displayed over your chart. These graphic displays show the height of the tide, and whether it is rising or falling, as well as the strength and direction of tidal currents. Double-clicking on any of these graphic indicators gives you a complete tide or current table for that station. Day /dusk / night display modes - unlike most pc-based applications w

Furuno Maxsea NAVIGATOR PLUS

with navigator , maxsea offers an entry-level system developed for the us market. You can connect your gps and autopilot, download/overlay weather, and perform advanced planning. You can begin using navigator right out of the box with the 130 us planning charts that are included. Navigator allows you to use your favorite detailed charts from mapmedia, maptech, softcharts, ndi and c-map nt. Unparalleled raster and vector chart support - if you already own electronic charts, the odds are that maxsea will read them. From c-map cartridges to maptech cd s to noaa enc s-57 foots, maxsea works with more charts than any other platform and displays them seamlessly. Maxsea is also the only platform that supports mapmedia charts with their patented m2 technology. Powerful layer technology - with maxsea s layers, the amount of text or other elements you can add to a chart is virtually unlimited. The overwhelming advantage of layers is that they allow you to segregate your marks and only show/hide the information critical to the task at hand. Advanced log book and annotation - information gathering is automatic and intuitive with maxsea. You can generate log book entries based upon any information coming into the system. You can save tracks, load and read wrecks and rookeries data, mark your favorite spots or where you ve set traps quickly and easily. Maxsea grows with you and quickly becomes the repository for priceless information accumulated while underway. Intuitive planning - one of the things that makes maxsea s interface so advanced is its simplicity. Routes can be created or changed in seconds. Maxsea can drive autopilots, upload routes to your plotter, and save them for future reference. Precise weather - not only does maxsea provide free access to the most comprehensive weather data available, it gives you the ability to really use it. with one button click, wind, waves, sea surface temperature, ocean currents, pressure and 500 mb data can be overlaid onto your navigation chart for display while planning or while underway. Integrated tides and currents - with a single button click, detailed tide and current indicators are displayed over your chart. These graphic displays show the height of the tide, and whether it is rising or falling as well as the strength and direction of tidal currents. Double-clicking on any of these graphic indicators gives you a complete tide or current table for that station. Day /dusk / night display modes - unlike most pc-based applications which just change the colors, maxsea offers full day/dusk/night control which dims the entire pc screen. Every element and chart detail on the screen is adjusted for maximum clarity under any light condition. Software

Furuno NX-300 Navtex Receiver

Furuno s nx300 paperless navtex receiver is the most economical way of monitoring navigational warnings, meteorological warnings, search and rescue information and other data for ships sailing within 200-400 n. M. of shore. Every incoming message is identified and new messages are read from the high-contrast 4. 5 inch LCD display, no paper is required. However, you can print out the message via a pc. The nx300 consists of the compact, waterproof display and an h-field loop antenna. You can also use the nx300 as a nav repeater, by using its nmea0183 port to connect it to your gps or dgps receiver.

Furuno PG-1000 Heading Sensor

Furuno s pg1000 heading sensor incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship s heading. These sophisticated components are contained within a rugged, compact case that protects against the elements at sea. Unique design elements make the pg1000 virtually maintenance-free and easy to install. The pg1000 heading sensor detects terrestrial magnetism and produces compass data that can be utilized in nmea0183 and furuno ad10 formats. Typical applications include true radar echo trail and true motion, video plotters, scanning sonars and more. Includes cable

Furuno PG500R Sensor

Furuno s PG500R is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship s heading. These sophisticated components are contained within a rugged, compact case that protects against the elements at sea. Unique design elements make the PG500R virtually maintenance-free and easy to install. The PG500R heading sensor detects terrestrial magnetism and produces compass data that can be utilized in nmea0183 and furuno ad10 formats. Typical applications include true radar echo trail and true motion, auto pilots, video plotters, scanning sonars and more.

Furuno RD30 Digital Depth

If you are looking for a unit to show you precise depth down to 2 ft and temperature to 0. 02 of a degree, then the RD30 is the answer. Simply connect the RD30 to our new furuno smart sensor and you are ready to go! The new furuno smart sensor is an ingeniously engineered depth sensor, entirely encased within its own transducer housing. The smart sensor connects directly to the RD30 display, via the nmea data port, without requiring any additional processor or junction box. Power is supplied to the smart sensor from the connected display. The smart sensor operates at 235khz. This frequency was chosen for its excellent ability to provide solid performance at both high speeds and in very shallow depths. Additionally, the 235khz frequency will not interfere with other furuno echo sounding equipment, including any products running at 200khz. These versatile products can also be added to any navnet system, providing numerous nmea data display modes, including: depth, temperature, wind data, speed, bearing, course, position, etc. Remote display

Furuno ST-02MSB Brz Spd/Tmp Th

Bronze thru-hull speed and temperature sensor 6-pin connector 9-meter cable

Furuno Xn10a-3.5 3.5 Foot Antenna

The xn10a/3. 5 is a well designed 3. 5 foot open array antenna. The xn10a has a 2. 2 horizontal beam width. Its range is 48 nautical miles. For 1762/1933 series

Furuno XN12/4 49 Antenna

The xn12a/4 is a 4 foot open array antenna with a horizontal beam width of 1. 85 degrees. For: 1942mkii/frs-1000c

Furuno Xn13a 6 Foot Antenna

The XN13A/6 is a 6 foot open array antenna that has a horizontal beam width of 1. 2.